Members | Sign In
ScannerDanner Forum > Post your repair questions here
avatar

2012 Nissan Juke - No Injector Pulse - HELP

posted Jun 12, 2016 18:57:23 by HolmerArgent
This car, came from another shop, i am told that ecm has being replaced, due to no injector pulse, car cranks alright but no injector pulse, when fuel is send into the inlet, it start alright till the fuel finished then it is off, this means the injectors are not opening, please i seek for advice what might be blocking the earth.

N.B: No fault code at all
page   first prev 1 2
16 replies
avatar
RassielCotoMedina said Jun 15, 2016 11:43:25
So you are saying that there is power and no control to the injectors and if you add carb cleaner to the intake it runs, meaning that there is spark, timing is ok, and critical inputs are ok right?
well to me the next step is to go to the pcm and check for injector pulse at the pcm, if no injector pulse look for a shorted injector that burned the driver in the pcm, but that would be weird cause i dont think that the pcm uses the same driver for all the injector, we need a wiring diagram can you give us the vehicle info?
Login below to reply: